Hanging the drywall is only half the battle. It requires immense attention to detail and lots of downtime waiting for layers to dry.Also, make sure you take the time to wear the proper protective gear.Before you apply the finishing coat, make sure the wall is perfectly smooth - use your taping knife to whittle down any bumps if you have a problem. This drywall finishing technique is they key to having nice, smooth walls. You will need to make sure that the compound you are using is not too thick or too thin, and you will need to make sure any imperfections in the drywall are filled and smoothed out. The real thing that is going to determine how your walls look is how well you do at mudding drywall. Step by StepIf you think that you're going to fly through this process, think again. The first step should be running one of these knives over the wall to make use you haven't left any raised nails to be immortalized forever in the drywall mud.You'll also need a few taping knives at your disposal to get started. Know Your StuffYou can't mud drywall on the fly. Do your home work and make sure you really understand what everything is and how everything works before you start slapping mud on that drywall - you'll be glad you did. Usually two layers of mudding material will do the trick. Here's how to tackle mudding drywall and get a good result..Drywall finishing requires a few different compounds - jointing, taping and topping. Each of these comes in a pre-mixed form or a powdered form that you have to mix yourself; save yourself some time with the pre-mixed form. Drywall can be notoriously irritating to the eyes and the lungs, so wear a mask whenever working with it.The four steps involved in mudding drywall are taping, then several stages of smoothing, and then the finishing coat. You'll be glad you did. Sit back, take a deep breath and take the time to do it right.3. If you are new to mudding, use all three so you can layer as you go.If you have hung your drywall and think you are done, think again. Mudding drywall takes a minimum of four days - you'll need to give things a chance to dry for a day or more between steps. Patience is a VirtueMudding drywall can try the patience easily. While the taping layer can be relatively easy to tackle, the smoothing is what celebrates the men from the boys.1. There is also a jointing compound that claims to do the job of all three, but it requires a good eye to make sure.
Saturday, February 16, 2008
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment